Generator: Minimum 25 kW standby after derating, 60 Hz, 120/208 V, 3-phase, 4-wire, with 100 A breaker. Size for sequential pump starts up to 31.99 kW/42.7 kVA, with maximum 30% voltage dip and 10% frequency dip; include a sizing report. - Enclosure: Green aluminum Level 2 sound-attenuated enclosure, rated for 180 mph winds and maximum 72 dBA at 23 feet; include controller, battery, charger, heater, and remote emergency stop. - Fuel tank: UL 142 dual-wall sub-base tank providing at least 48 hours at 100% standby rating. State usable gallons, full-load fuel consumption, and runtime; include initial ULSD fill to 85–90% of usable capacity. - Transfer switch: UL 1008, minimum 100 A, 208/120 V, 3-pole solid neutral, open transition with in-phase monitor; include a new enclosure if needed and automatic start/transfer within 10 seconds. - Installation: Concrete pad, anchorage, trenching, at least three conduits, wiring, grounding, and surface restoration. Install generator, tank, and transfer switch at least 2 feet above base flood elevation or the stricter required elevation; connect alarm contacts to existing telemetry. - Commissioning: Factory test report, startup, 2-hour rated-load…
Scope as published by the buyer, or our plain-English summary of it. Open the listing above for the full solicitation.
Of the 1 open fuel & petroleum contract in Connecticut, none are federal1 is state or local. That split matters: federal work runs through SAM.gov and needs a UEI and an active SAM registration, while state and local buyers each run their own portal with their own vendor sign-up. XL Eagle already holds both.
Posted on: OpenGov (1)
Closed in the last 90 days. Useful for pricing and for seeing which buyers order this work again.
Most fuel & petroleum firms never bid government work because the overhead is the barrier, not the job: SAM registration and a UEI, reps and certifications, bonding on larger jobs, wage determinations, and a different submission portal for almost every buyer. That is administrative work, not trade work.
XL Eagle bids as the prime contractor. We carry the registrations, write the proposal, own the compliance and submit through whichever portal the buyer uses. You price the work and perform it as our subcontractor. There is no fee to you and no registration for you to maintain.
1 live fuel & petroleum opportunity in Connecticut as of November 8, 2026. The list is rebuilt daily.
For the federal solicitations, yes — a UEI and an active SAM.gov registration. State and local buyers use their own portals instead. Working through XL Eagle as the prime, you need neither: we hold the registrations and submit the bid.
A mix of federal agencies and state and local buyers; the current list is on this page.
Nothing up front. XL Eagle bids as the prime contractor and the businesses that perform the work are paid as subcontractors on the awarded contract.
Fuel & Petroleum contracts in every state · NAICS 324110: Petroleum Refineries · Subcontract fuel & petroleum work through XL Eagle · All Connecticut state and local bids
Electrical (5) · Construction & Renovation (4) · Landscaping & Grounds (2) · HVAC (2) · Roofing (2) · Flooring (2) · Water & Wastewater (2) · Environmental Services (2) · Marine & Diving (2) · Maintenance & Repair (1) · Plumbing (1) · Transportation & Hauling (1)
XL Eagle