XL Eagle Send us your price
Oregon bid · open for prices

CNC Plasma Cutting Table

G, Bend, OR 97703.

Due
December 2, 2026
13 days left
Location
Bend, OR
Oregon
Posted on
OregonBuys
Notice ID
S-73000-00018406

Please quote one 6' x 12' CNC plasma cutting table with delivery, installation and operator training at 63055 N Hwy 97, Bldg. G, Bend, OR 97703.

  • Table: 6' x 12' high-definition-capable CNC plasma table for mild and carbon steel up to 2" thick, cutting area 147"L x 73"W x 6.75"H, fully welded, with 8" deep water table and air ballast system or approved equivalent.
  • Cutting system: Hypertherm MAXPRO200, 220V three-phase, or approved equivalent, with oxygen, nitrogen, air and argon capability.
  • Controls: Flashcut CAD/CAM/CNC that works with existing files and software with no added licenses or subscriptions, plus mobile console with 15' harness, joystick pendant and touchscreen of at least 24".
  • Accessories: Collision detection with manual bevel torch mount to ±45°, laser plate alignment, CoolFlow recirculation system or equivalent, air filtration with dryer and filters, and a consumables kit.
  • Installation: Includes freight, unloading, setup, testing and 16 hours of operator and maintenance training at Bldg. B, with trainer expenses covered. Finish within 90 calendar days of authorization to proceed.
  • Warranty: Plasma unit 6 years, motion controls at least 3 years, computer and peripherals at least 2 years, with all warranty repair costs included. Service location within 150 miles and 24-hour on-site repair response.

Please confirm availability and send your quote by December 2, 2026.

What it takes to win this job

Past winners charged about $45,300 per plasma cutting table. This job is 1 plasma cutting table, so about $45,300.

Rough guideBased on 14 past awards for the same work, each divided down to one plasma cutting table. Past prices were far apart, so check this against your own costs.

To win it, you need

  • Table and cutter: Quote one 6-by-12-foot CNC plasma table for steel up to 2 inches thick with a Hypertherm MAXPRO200 cutter or approved equivalent.
  • Compatible controls: Provide Flashcut integrated CAD/CAM/CNC controls compatible with existing files and software without added licenses or subscriptions.
  • Delivery and training: Include freight, unloading, setup, testing and 16 hours of training with trainer expenses, completed within 90 calendar days of authorization to proceed.
  • Local support: Provide a service location within 150 miles and a 24-hour on-site repair response.
  • Warranty: Cover all warranty repair costs for the plasma unit for 6 years, motion controls for at least 3 years and computer peripherals for at least 2 years.

Past awards for the same work

Who wonTotalSizePer unitDate
Citibank, N.a.Plasma cutting table system $42,8481 plasma cutting table$42,848Sep 2026
Paula F Price Enterprises LLCTorchmate 4400 CNC plasma cutting table $43,9201 plasma cutting table$43,920Jul 2026
W.w. Grainger, INC.5-by-10-foot CNC plasma cutting table $61,0361 plasma cutting table$61,036Sep 2025
Kijero, LLCCNC plasma cutting table $54,3001 plasma cutting table$54,300Sep 2025
Baldwin Services Group Limited, INC.ARC1 plasma cutting table $43,8941 plasma cutting table$43,894Sep 2025
Fortune Machinery Group LLCPlasma cutting table with installation, accessories, and training $57,4951 plasma cutting table$57,495Sep 2025

Past prices come from public federal award records on USAspending.gov. State and local buyers do not post theirs in one place, so these are federal buys of the same work. Your price still has to cover your own costs.

The original documents

Deadline: December 2, 2026

  • 00018406 RFCQ.docx DOCX · 14 pages
  • 00018406 Sample Contract.docx DOCX · 14 pages

See the original on oregonbuys.gov

Bidding it yourself? Get the full package and submit on OregonBuys before December 2, 2026.

What they need

  • TableOne 6' x 12' high-definition-capable CNC plasma table for mild and carbon steel up to 2" thick; cutting envelope 147"L x 73"W x 6.75"H; overall dimensions 200"L x 124"W x 60"H; fully welded construction and 8" deep water table with air ballast system or approved equivalent.
  • Cutting systemHypertherm MAXPRO200, 220V three-phase, or approved equivalent; oxygen, nitrogen, air, and argon capability.
  • ControlsFlashcut integrated CAD/CAM/CNC compatible with existing files and software without additional licenses or subscriptions; mobile console with 15' harness, X/Y/Z joystick pendant, minimum 24" touchscreen, and Logic Board Digitizing System.
  • AccessoriesCollision detection with manual bevel torch mount to ±45°, laser plate alignment, CoolFlow recirculation system or approved equivalent, air filtration with regenerative dryer, oil coalescing filter and automatic water separator, and mechanized cutting consumables kit.
  • Installation and trainingInclude freight, unloading, setup, operational testing, and 16 hours of operator/maintenance training, including all trainer expenses. Training location: 63055 N Hwy 97, Bldg. B, Bend, OR 97703. Complete within 90 calendar days of authorization to proceed.
  • Support and warrantyService location within 150 miles of the installation site and 24-hour on-site repair response; comprehensive plasma unit warranty of 6 years, motion controls at least 3 years, and computer/peripherals at least 2 years. Include all warranty repair costs.

What you have to submit

Pulled from the 2 solicitation documents (28 pages). Each item links to the page it came from. Check the originals and any amendments before you bid.

1How and where to submit

  • Quotes must be submitted by upload through OregonBuys by the Closing (Bid Opening Date in OregonBuys); quotes submitted by any other means will be rejected.Source: 00018406 RFCQ.docx, page 4
  • Preferably submit all documents as one pdf attachment, unless a pricing form is provided in Excel. Keep attachments to about 5 megabytes and select the Confidential checkbox when uploading.Source: 00018406 RFCQ.docx, page 4

2Forms to fill out

3Bonds and insurance

4Licenses you need

5Pricing format

  • Offeror must enter all required pricing online in the Item Information section of the OregonBuys Bid Solicitation page; unit prices prevail over extended prices.Source: 00018406 RFCQ.docx, page 5
  • Price items: Plasma Cutting Table, equipment, software and installation (1 LS), and Operator/Maintenance Training (16 Hour).Source: 00018406 Sample Contract.docx, page 2

Similar open bids

Get new Oregon bids by email

Save a search and we email you when a matching bid is posted. Free. Unsubscribe anytime.

More Oregon bids → · Welding, Fabrication & Machining bids in Oregon → · Construction & Renovation bids in Oregon → · IT Services & Software bids in Oregon → · Transportation & Hauling bids in Oregon → · All states →