Equipment: Two fully packaged, four-stage units manufactured in 2010 or later, each with 0–5,000 verified operating hours and documented prior utility or public-entity ownership and maintenance.
Due
November 24, 2026
11 days left
Location
Massachusetts
Posted on
COMMBUYS
Notice ID
BD-24-2045-MWRTA-MWRTA-134953
Please quote two used four-stage CNG compressors, including refurbishment, delivery, and rigging, for delivery to 15 Blandin Ave., Framingham, MA 01702.
Equipment: Two fully packaged, four-stage units made in 2010 or later, each with 0 to 5,000 verified operating hours and documented prior utility or public-entity ownership and maintenance.
Performance: At least 410 scfm at 22 psig suction, 22 to 25 psig inlet range, and 3,600 psi discharge, compatible with existing storage and dispensers.
Motor: Maximum 200 HP, 480 V, three-phase, 60 Hz.
Packaging: Skid-mounted with sound-attenuated enclosure or equivalent ductwork, crankcase heater, and on-unit HMI for each unit; maximum 8 ft 6 in wide by 12 ft long by 8 ft 6 in high; venting details required.
Refurbishment: Clean, remove rust and flaking paint, repaint, replace worn gauges and labels, verify safety systems, recertify relief valves, and complete documented testing including a 72-hour run under normal station load.
Delivery: Includes freight, on-site rigging, secure storage until scheduled delivery, and inspection support; required by June 30, 2027, with at least 12 months of parts and labor warranty from delivery.
Please confirm availability and send your quote by November 24, 2026.
The original documents
Deadline: November 24, 2026
See the original on www.commbuys.com
Bidding it yourself? Get the full package and submit on COMMBUYS before November 24, 2026.
What they need
PerformanceMinimum 410 scfm at 22 psig suction; 22–25 psig inlet range; 3,600 psi discharge, compatible with existing storage and dispensers.
MotorMaximum 200 HP, 480 V, three-phase, 60 Hz.
PackagingSkid-mounted with sound-attenuated enclosure or equivalent ductwork, crankcase heater, and individual on-unit HMI. Maximum dimensions per unit: 8 ft 6 in wide × 12 ft long × 8 ft 6 in high. Provide venting details.
Refurbishment and testingClean inside and out, remove exterior rust and flaking paint, repaint exterior surfaces, replace worn gauges and labels, verify safety systems, and recertify relief valves. Include documented run testing, leak and shutdown checks, control-system reporting, and a 72-hour run under normal station load.
Delivery and warrantyInclude freight, on-site rigging, secure storage until scheduled delivery, inspection support, and at least 12 months of parts and labor coverage from delivery. Delivery required by June 30, 2027.
Quote detailsInclude models, years, hours, maintenance history, performance data, dimensions, photos, warranty terms, and delivery lead time.
Past history: who won Inspection & Testing work in Massachusetts
Recent federal contract awards (federal buyers) in the same industry in Massachusetts, from USAspending.gov. These are comparable jobs, not earlier rounds of this exact solicitation.
Typical award:$18K to $129Kmiddle half of 15 recent awards · median $31K
XL Eagle